Albertslund Ceiling/Wall Retrofit Kit

Albertslund Ceiling/Wall Retrofit Kit

Design by
Jens Møller-Jensen
ColourAluminium Colour
Product spec sheetProfessional tools

About the Albertslund Ceiling/Wall Retrofit Kit

Albertslund Wall was designed by Jens Møller-Jensen in 1963 for a residential project in Albertslund, Denmark. The wall light is based on the same design seen in the Albertslund post light – a non-glare ring, three bolts and a Saturn ring, which serves as a reflector.

  • The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the fixture itself. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as clear or partly frosted glass, depending on the desired light source.

  • Light sourceLight source E27
    ClassIngress protection IP44. Electric shock protection I w. ground. IK06.
    Other informationThe control gear is placed in the wall box. Please note that the top, wall box and arm appears in natural aluminium surface for the versions with galvanised shades. Both natural luminium and galvanised surfaces will oxidize during time. This can result in an inconsistent surface finish during oxidation. This process might have begun already during stocking/transportation.
  • MaterialsAluminium, rubber.
    FinishAluminium.
  • Albertslund Ceiling/Wall Retrofit Kit dimensions
    Weight:0,7 kg
  • Terminal block: 1x3x2.5mm². Cable entries: 2x rear entries for cable Ø 10-14.5mm and 2x bottom knockouts Ø 15mm. Looping: Approved, max. 3x1,5mm². Ballast positioning: In wall box.Mounting instructions
  • We supply spare parts, replacement parts, and accessories for a large number of our products. Please contact us atenquiries@zormivexalt.digital.sg or +65 6735 4880.

  • Variant number
    WALLE275743144707
    CEILINGE275742130453